manualshive.com logo in svg

Dynapro Technologies Dynapro ET TCS, Руководство разработчика приложений, Страница: 85 / 337

Поделиться
Скачать
Dynapro Technologies Dynapro ET TCS Скачать руководство пользователя страница 85

4-34

If the default mapping is not in effect for the Displayed Screen, the TCS displays whatever
character corresponds to the code crossing the communication link, according to the character
font mapping in effect. See Chapter 5 for details about character font mapping.

)LJXUH6DPSOH&RPPXQLFDWLRQ0RQLWRU6FUHHQ

When characters have filled a line to the right margin of the TCS display, the TCS auto-wraps
subsequent characters to the next line. When it has filled with characters, the display scrolls. The
Scroll Lock key on the optional keyboard can be used to stop and restart the display of new
characters.

 

7&62SHUDWLRQ:KLOHWKH&RPPXQLFDWLRQ0RQLWRULV$FWLYH

While the Communication Monitor is active, the TCS displays a character for each code crossing
the communication link with the host. All TCS-generated codes (codes resulting from touching
the TCS touch panel or typing on the optional keyboard) are sent to the host as well as displayed.

If multidrop operation is in effect while the Communication Monitor is active, the TCS displays
characters for all codes received from the host, even if that particular TCS is not addressed. See
Chapter 2 for details of Multidrop operation.

Control codes, which do not usually cause characters to be displayed (ASCII 00 through 32 hex,
80 through 9F hex, 7F hex and FF hex), can be seen and verified with the Communication
Monitor. With two exceptions noted below, these codes are displayed as characters but are not
acted on in a control fashion. That is, codes sent from the host while the Communication Monitor
is active do not affect the programming of the TCS in any way.

Содержание Dynapro ET TCS


















































































































































































































































































































































Отзывы:

Нет отзывов