manualshive.com logo in svg

Dynapro Technologies Dynapro ET TCS, Руководство разработчика приложений, Страница: 154 / 337

Поделиться
Скачать
Dynapro Technologies Dynapro ET TCS Скачать руководство пользователя страница 154

5-67

 

1DWLRQDO5HSODFHPHQW&RGH&RPPDQG^)15&`/RFDO5HPRWH

The National Replacement Code (NRC) command lets the user or host substitute a designated set
of international characters in place of some standard ASCII characters on the display.

This command allows text containing characters unique to one of 11 languages to be displayed
and manipulated without a special keyboard or 8-bit codes. Table 5-11 shows the default contents
of the character sets and the characters that are replaced.

The NRC command selects a value for the NRC parameter.

•

 

When the NRC parameter is “off,” 7-bit graphic codes sent from the host are directly mapped
to the Standard Character Set.

•

 

When the NRC parameter is set to a country designator, some 7-bit graphic codes sent from
the host for display are remapped using the National Replacement Code specified by the
NRC value.

The NRC selection affects the TCS display only, not the communication between the TCS and
host. International characters are substituted on the display only, not in the codes transmitted
between the TCS and host.

For example, after setting the NRC value to “German,” the user can create a text file that
contains standard ASCII characters. When this text file is displayed, the appropriate German
characters are displayed. However, if the same file is viewed with the NRC set to “off,” the
displayed international characters which were peculiar to the German NRC appear as standard
ASCII symbolic characters; for example, an “a umlaut” (ä) is displayed as a left-brace ({).

NOTE

1. A change to the NRC affects only the codes received after the NRC is changed.

2. Which characters the TCS displays depends on the contents of the Extended Character Set. It is

recommended that the Static Special Character Font be mapped into the Extended Character Set whenever

any National Replacement Code is in use. This is the default situation unless the host has issued a Map

Character Font command involving the Extended Character Set.

 

'()$8/7

Off.

 

23(5$72586$*(

The user selects the National Replacement Code by entering the Setup Screen and using
touchkeys or the optional keyboard, setting the NRC parameter to one of the following values:

•

 

off

•

 

Danish

•

 

Dutch

•

 

French

•

 

Canadian

Содержание Dynapro ET TCS


















































































































































































































































































































































Отзывы:

Нет отзывов