manualshive.com logo in svg

Dynapro Technologies Dynapro ET TCS, Руководство разработчика приложений, Страница: 232 / 337

Поделиться
Скачать
Dynapro Technologies Dynapro ET TCS Скачать руководство пользователя страница 232

6-42

 

(;$03/(6

<ESC>[9;;;;5t

Reverses the blink attribute for the entire screen.

<ESC> [9;12;51;2;4;1t

Reverses the highlight and underline attributes in the border of a 12 line by 51 column region
with upper left corner at the cursor.

<ESC>[9;1;50;1;8t

Reverses the conceal attribute in the inner part of a 1 line by 50 column region. If the
characters in the inner part of the region were not visible (concealed) before this command
was sent, the characters will become visible (unconcealed). If the characters were visible
(unconcealed) before this command, they will become invisible (concealed).

Содержание Dynapro ET TCS


















































































































































































































































































































































Отзывы:

Нет отзывов