Dynapac V5100TV-H, Приложение, эксплуатация и обслуживание

Страница: 40 / 196

C 2
2 Transporting the removed screed
A
The procedure required to load and transport the screed
when installed
on the paver
finisher is described in the operating instructions for the paver finisher.
The screed must be retracted to the basic width. All protruding or loose parts and the
gas bottles for the screed heating system (
o
) (see Chapters E and D) must be re-
moved. Hydraulic and electrical connections must be disconnected.
f Heed the capacity of the fork-lift truck / of the crane and the lifting gear (chains, ca-
bles, hooks, etc.)!
A
For the weights and the dimensions of the screed, refer to Chapter B, section "Tech-
nical data".
A
Gewichte und Abmessungen der Bohle siehe Kapitel B, Abschnitt „Technische Da-
ten“.
A
Secure hinged walkways to the intended
hole / strap with the corresponding
springs (1) / (2).
A
Hang the springs (1) / (2) in the provided
retaining hole (1a) / (1b) with the walk-
ways in the lower position.
2
1
2a
1a