Dynapac V5100TV-H, Приложение, эксплуатация и обслуживание

Страница: 133 / 196

E 39
7.4 Basic adjustments
Prior to basic adjustment, the extendable parts must be adjusted as described in
Chapter 5.
Carry out basic adjustment as follows:
1. In the case of finishers fitted with tyres, set the correct tyre pressure.
2. Drive the paver finisher onto a level surface. The size of the area must correspond
to the total base of the paver finisher. The engine remains in operation.
3. Lower the screed hydraulically.
4. P-equipment: Set the lever of the switch box to the zero position.
5. Bring the screed to the floating position. (see operating instructions for the paver
finisher).
6. Set the crowning setting to zero with
the ratchet (1). The value can be
read off on the scale (2).
A
A hydraulic crowning adjuster is availa-
ble as an option.
Adjustment is carried out and displayed
in the remote control setting menu (see
paver finisher operating instructions).
7. Fully extend both levelling cylinders.
1
2