DURKOPP ADLER beisler 2112-5, Инструкция по эксплуатации

Страница: 58 / 104

Programming
56 Service Instructions 2112-5 - 00.0 - 02/2020
If the message
BOBBIN EMPTY
appears:
1. Insert a full bobbin.
2. Press the key.
If the display shows the message
BOBBIN: 004 M
when a full bobbin is
inserted:
1. Press the key.
2. Press the key.
Information
If the bobbin is empty and the display does not show a status message,
the photocell sensitivity must be adjusted (

p. 33
).
8.5.9 Initializing the loading process
This function depends on the mode of the machine cycle. It refers only to
machine movements that can be performed before the automatic cycle.
To initialize the loading process:
1. Press the key.
 The machine movements will be reset to the initial position.
8.5.10 Winding the bobbin thread manually
Important
To prevent needle thread and hook thread from becoming entangled,
the needle thread must be removed up to the thread lever.
To wind the bobbin thread manually:
1. Press the key.
2. Press the key.
3. Press any key to finish.