DURKOPP ADLER beisler 2112-5, Инструкция по эксплуатации

Страница: 55 / 104

Programming
Service Instructions 2112-5 - 00.0 - 02/2020 53
8.5.3 Submenu
Insertion distance length, photocell
correction at seam beginning
The settings made in this menu refer to each selected seam and are in
close relation to the settings made for the seam end (

p. 53
).
To set the length of the insertion distance and the photocell correction for
the seam beginning:
1. Press the key.
 The cursor marks the value that can be changed.
2. To change the value, press the or arrow key.
OR
3. To input a new value, enter the desired number combination on
the numeric keypad.
4. To confirm your input and exit the menu, press the key.
8.5.4 Submenu
Photocell correction for seam end, seam
length and fixed seam end point
The settings made in this menu refer to each selected seam and are in
close relation to the settings made for the seam beginning (

p. 53
).
To set the photocell correction for the seam end, seam length and fixed
seam end point:
1. Press the key.
 The cursor marks the value that can be changed.
2. To change the value, press the or arrow key.
OR
3. To input a new value, enter the desired number combination on
the numeric keypad.
4. To confirm your input and exit the menu, press the key.