DURKOPP ADLER beisler 2112-5, Инструкция по эксплуатации

Страница: 75 / 104

Programming
Service Instructions 2112-5 - 00.0 - 02/2020 73
Switching the needle thread monitor on or off
For testing purposes, the needle thread monitor can be switched off.
Important
During normal production, the needle thread monitor should always be
switched on as the sewing program will otherwise not be stopped if
the thread breaks.
To switch the needle thread monitor on or off:
1. Press the key.
Switching the remaining thread monitor on or off
For testing purposes, the remaining thread monitor can be switched off.
Important
During normal production, the remaining thread monitor should always
be switched on as the sewing program will otherwise not be stopped if
the thread breaks.
To switch the remaining thread monitor on or off:
1. Press the key.
Switching the clamp position after the seam end on or off
If this function is enabled, the clamp moves to the clamp transport end
point behind the seam end before releasing the sewing piece.
To switch the function
Clamp position after seam end
on or off:
1. Press the key.
Moving the clamp to the waiting position
If this function is enabled, the clamp moves to the waiting position after
the seam end.
To activate the function
Move clamp to waiting position
:
1. Press the key.
Cutter
left side pocket
To activate the cutter left side pocket:
1. Press the key.