DURKOPP ADLER beisler 2112-5, Инструкция по эксплуатации

Страница: 56 / 104

Programming
54 Service Instructions 2112-5 - 00.0 - 02/2020
Important
The settings must be checked using a sewing piece and corrected if
required.
8.5.5 Removing the sewing material at the stacker
The lifting table of the stacker can be lowered to remove the sewing
material.
To lower the lifting table and to raise it again:
1. Press the key.
8.5.6 Driving the assistance transport to the service position
To create sufficient space for work steps on the sewing head, the assistance
transport can be driven to the outer service position.
To drive the assistance transport to the outer service position and return it
to its initial position:
1. Press the key.
Seam Description
Seam 1 Seam beginning and seam end are determined by the scan points of
the photocell.
The setting refers to the seam length to be fixed. The higher the input
value, the longer the seam.
Seam 2 The seam beginning is determined by the scan point of the photocell.
The seam end is determined by a fixed seam length.
The setting refers to the seam length to be fixed. The higher the input
value, the longer the seam.
Seam 3 The seam beginning is determined by a fixed insertion distance.
The seam end is determined by the scan point of the photocell.
The setting refers to the correction of the photocell made for the seam
end. The higher the input value, the later the cancellation of the sewing
process.
Seam 4 The seam beginning is determined by a fixed insertion distance.
The seam end is determined by a fixed seam length.
The setting refers to the seam length to be fixed. The higher the input
value, the longer the seam.
Seam 5 Seam beginning and seam end are determined by the scan points of
the photocell.
The setting refers to a correction of the photocell made for the seam
end. The higher the input value, the later the cancellation of the sewing
process.