DURKOPP ADLER beisler 2112-5, Инструкция по эксплуатации

Страница: 28 / 104

Setting up the machine
26 Service Instructions 2112-5 - 00.0 - 02/2020
Adjusting the horizontal alignment
To adjust the guide laser horizontally:
1. Loosen the screw (3).
2. Rotate the laser (4) to the desired position.
3. Tighten the screw (3).
Adjusting the vertical alignment
Information
You can use the vertical alignment of the guide laser to determine the
seam width when sewing the zipper fly.
If the alignment of the laser to the left is changed, the seam will narrow,
while the seam will become wider if the alignment of the laser to the right
is changed.
To adjust the guide laser vertically:
1. Loosen the screw (2).
2. Swivel the angular bracket (1) of the laser to the desired position.
3. Tighten the screw (2).