DURKOPP ADLER beisler 2112-5, Инструкция по эксплуатации

Страница: 73 / 104

Programming
Service Instructions 2112-5 - 00.0 - 02/2020 71
Switching the vacuum on or off
The vacuum is used as a fixing aid for the left or right trouser component
before the clamp transport transfer.
The vacuum can be disabled during the checking of machine movements.
Important
During normal production operation, the vacuum should always be enabled
as failures in the machine cycle may otherwise occur.
To switch the vacuum on or off:
1. Press the key.
Switching the automatic label feed system or on off
Folded labels can only be sewn with the automatic label feed system.
Plain labels can be placed onto the pocket facing manually when the
automatic label feed system is switched off.
To switch the automatic label feed system on or off:
1. Press the key.
Switching the cutters on or off
Sewing programs have been programmed at the factory with an individual
cutter cut.
For specific seams, this function can be enabled or disabled separately.
To switch the cutter
left trouser component
on or off:
1. Press the key.
To switch the cutter
right trouser component
on or off:
1. Press the key.
To switch the cutter left fly piece on or off:
1. Press the key.