Duplex Jeti DS-12, Руководство пользователя

Страница: 98 / 151

computer radio control system EN
4.
4.
After you have finished setting the inertial unit itself, you can assign
the resulting variables to any function using a standard input dialog
(picture ) . To see the variables of the inertial unit, you have to press c)
the "F2 Gsens.” button. The axes GX, GY, GZ correspond to the graph
shown in the picture ). The last parameters are called Shake L/R a)
and represent a motion gesture. If you quickly shift the transmitter to
the left, the G/L switch will be activated for a short time. Similarly, a
single movement to the right activates the G/R switch. You can use
these gestures to trigger voice announcements, flip pages of the
main screen etc.
The parameters
"Axis X<<" and "Axis X>>" represent virtual
twostate switches which are activated when the transmitter is tilted
to the left or to the right along the X-axis.
The "GHi" switch can be used for discuss launch glider (F3K)
detection. It is based on large acceleration and gyroscope readings.
That means, the transmitter is capable of detecting the launch of the
DLG (F3K) model airplane. The "GHi" switch can be assigned to any
function, sequencer or logical switch.
9.3.8 Telemetry Controls
Not only can you display telemetry data, record it to your SD card or
have it voice announced, now it is
possible to control specific model
functions using sensor inputs. This
way, some tasks that previously
required manual adjustment via
visual estimation or alarms can
now be automated.
Up to 8 controls labeled MX1 –
M16 are available, depending on
the type of transmitter and
equipment. Telemetry controls
offer functionality in two modes:
The Switch mode enables you •
to create a virtual two-position
switch using the value of one
telemetry parameter. This switch is
always active based on the
fulfillment of defined logical
conditions.
The Proportional Control mode •
enables you to transform a certain
range of sensor values into a fully
proportional control. It can
automatically and smoothly
control any kind of function using
telemetry feedback.
GY
30° Pitch Offset
GX
GZ
100%
0%
Roll (GX)
Sensitivity = 100%
Dead Zone
-90° 0° 90°
-100%
Sensitivity = 200%
(*depends on equipment)
98