Duplex Jeti DS-12, Руководство пользователя

Страница: 67 / 151

computer radio control system EN
Adding Flight Modes 1.
Pressing the “F3 (Add)” button creates a new flight mode. Simply
highlight existing mode and press “F3 (New)” button. A copy
confirmation menu appears on the screen, use the function keys to
continue.
Press the “
F5 (Yes)” button to create copy of the existing flight mode.
Press the “F3 (No)” button to create a new flight mode.
Press the “F1 (Esc)” button to be taken to main flight mode menu
screen.
Naming Flight Modes 2.
We recommend naming flight
modes according to their function,
for example:
Take Off, Soaring,
Autorotation….
Flight mode names/labels can be
easily edited at any time.
3. Flight Mode Delays
The time delay function can help smooth the transition from one
flight control state to another. Sudden changes in the positions of
your control surfaces can negatively affect performance or even
create a critical situation. The Time delay can help you avoid this
situation.
4. 4.
1
2
3
If no flight mode is required, do not change the pre-set
configuration. Advice:
If the desired result is not already tested or fully known
(maiden flight), always make sure that you have set
enough time delay for all of the changes to be
implemented and that you have plenty of time to
respond properly.
Advice:
Throttle hold is not affected by the time delay. This
function will always be performed instantly.
Warning:
4. Flight Mode Activation
A flight mode can be activated by any control device
(Switch/Knob/Stick). When you select a switch and by editing its
desired assignment you can activate and pick the position at which
this
Switch/Knob/Stick or Logical Switch will turn flight mode ON or
OFF (see chapter 9.7) . You can use the visual indicator in the switch
column to help you determinate the ON or OFF switch position
foreach flight mode.
•
Check Mark – ON Position
•
X Mark – OFF Position
When the flight mode is activated, the flight mode name can be seen
at the top of the desktop screen.
67