Duplex Jeti DS-12, Руководство пользователя

Страница: 26 / 151

computer radio control system EN
5 RF Transmitter Modules
In order to achieve the highest transmission quality and reliability of
the DS-12 transmitters, we have decided to equip the radio with two
independent transmitter modules (DUPLEX 2.4GHz and 900MHz
NG). The transmitter modules have separate antennas. From the
point of transmission they are fully independent from each other.
The RF modules of the transmitter can operate in following modes:
•
"Default“mode – the 2.4GHz Duplex module communicates
with the receiver using its two independent antennas. This
improves safety and helps to cover dead angles as well.
•
"Double Path“mode – the transmitter RF module
communicate independently with two different receivers. The
receivers can be interconnected via an intelligent synthesizer,
for instance the JETI Enlink, or the basic control functions can
be divided between two independent receivers. In this mode
the 2.4GHz Duplex module communicates independently
with two receivers. This greatly improves safety and reliability
since both receivers communicate independently with the RF
module.
•
„Student“mode – the 2.4GHz Duplex module is assigned to
communicate with the instructor transmitter only.
Communication with the model takes place via instructor’s
transmitter only. If you operate two of the DS-12 transmitters,
one of them in the "Instructor“ mode and the other one in the
"Student“ mode, the transmitters communicate between each
other via cable connection.
•
Back-up Transmitter Module
The DS-12 are equipped with a wireless backup system . This
works on the 868MHz ( EU ) or 915MHz ( US, AU, JP ) band . This
backup system can optionally be used to the "standard" and
"2-way RF" modes. So it is not designed as a single transmission
path and provides additional redundancy in addition to the
2.4GHz system .
2. 2.
26