Duplex Jeti DS-12, Руководство пользователя

Страница: 56 / 151

computer radio control system EN
4. 4.
1. Model name
Use the „3D Control Selector“ to select the model name menu. You
will enter the model name that you want the transmitter to use when
the model is stored in the transmitter‘s memory.
When you select the
"Name“ item, the screen will change into the
"Edit“ menu, where you can use the "3D button“ to enter a name for
your model. Use the "F1“ and "F2“ buttons to move the cursor, if
needed, within the name box.
Use the
"F3(ABC)“ button to change between lower case letters and
capital letters.
Use the
"F4“ button to delete the character at the current cursor
position .
When you finished editing your model’s name, use the "F5(OK)“
button to confirm the name and return to the
"New model“ menu.
The model name can be changed even after the model is stored by
going to:
" Main menu->Model->Basic configuration “ and
selecting the model name.
2. Model type
The model type selection makes the setup of your model more
In this menu you will setup the wing configuration, tail type, number
of motor/engines, number of spoilers, and number of landing gear
servos. Your model’s flight control functions are generated
according to your configuration choices in this menu and the
necessary fixed mixers become accessible.
9.1.3 Basic configuration - AIRPLANE
1. Wing Type
The following wing type options are available:
1
2
3
4
5
6
efficient by populating the menus with many of the popular options
for each type of model. The possible choices are: Aero, Heli, X-Copter
and General. Once your model is stored it is not possible to change
that model’s type.
Once your model’s name is entered and the type is selected, press
the "F5(Next)“ button to go to the next menu assistant step: "Basic
Properties“. The software will only allow this step if both the model
name and type have been set up.
1
2
56