Duplex Jeti DS-12, Руководство пользователя

Страница: 119 / 151

computer radio control system EN
4. 4.
2. User Name
Enter the user name that you want to appear in the User block on the
desktop.
3. Stick Mode
The transmitter supports Modes 1-4. To change the stick mode you
can either use the
"3D button“ to highlight and select the line item
or simply press the "F3“ button. Either will take you into the Stick
Mode menu. Use the "F1-F4“ buttons to make your selection and
then press the "F5(Ok)“ button to confirm. The mode change will
only be effective for new models. All of your stored models will retain
their existing stick modes.
4. Sound Profile
This item allows you to select the sound profile for your transmitter.
This determines how your transmitter will audibly communicate
with you. You can select: quiet (mute), beep only, beep and voice
(sound file) or voice (sound file) only.
5. Date and Time
Here is where you set the current date and time. The DS-12 will
automatically observe the time change for Daylight Saving Time.
The time and date information is used when creating new models
and for telemetry.
6. Distance Units
This menu item allows you to select the distance units for your
telemetry display. All telemetry data is automatically converted to
your selected units for display.
7. Temperature units
This menu item allows you to select whether your temperature data
is displayed in Farenheit or Celcius.
8. Transmit frequency
Says how often the stick positions will be refreshed. Please check the
settings of your receivers prior setting this option to
100Hz . The
Output Period should be set to "Auto" and maximum of 3 servo
groups (A, B, C) should be used. In other cases, the refresh rate will be
applied according to receiver settings.
9. Disable Startup Question
This menu item disables the question/confirmation during startup.
(see Chapter 6)
10. Reverse Menu Navigation
This menu item allows you to reverse the direction that the „3D
control“ scrolls through the menus.
11. Rolling Menu (up&down)
If this option is set to No, the ability to scroll from the last item in the
menu directly to the first one will be disabled (and vice versa from
the first row to the last).
12. Screenshot Capture Switch
This feature gives you the ability to create your own screenshots.
After you activate the switch, a bitmap is created in the root folder of
the SD card. You can create up to 1000 screenshots.
13. PPM onnector settings C
This option presents the possibility to configure the internal
connector labeled as PPM Output (please refer to the chapter 3.7
Use only digital servos that can handle 100Hz refresh
rate.
Warning:
119