DT SWISS O.D.L., Техническое руководство

Страница: 58 / 62

O.D.L - Technical Manual
57
Small Service
V2016.10
8. Fully slide the lower unit onto the stanchions.
Left dropout:
9. Screw the hexagonal socket screw on the left side
into the lower unit anti-clockwise using a 4 mm
Allen key.
10. Tighten the hexagonal socket screw with a torque
of 6 Nm.
Right dropout:
11. Screw the hexagonal screw into the lower unit
anti-clockwise using an 8 mm hexagon spanner.
12. Tighten the hexagonal screw with a torque of
6 Nm.
Right dropout:
13. Put on the rebound wheel.
14. Put thread lock onto the thread of the fixing
screw.
Required thread lock, see table on page 46.
15. Screw in the fixing screw and tighten it hand
tight.