DT SWISS O.D.L., Техническое руководство

Страница: 26 / 62

O.D.L - Technical Manual
25
Setting the Air Pressure
V2016.10
Setting the SAG (Negative-Travel)
The SAG is the amount of travel of which the fork will be compressed by the weight of the rider with full
equipment. If the SAG is adjusted correctly, the front wheel can follow the ground during the ride better.
To set the SAG, you should use the help of a second person.
1. Switch the fork to position «OPEN».
• Push the manual lever in position «OPEN» or
• push the lever into position «OPEN» or
• push the remote lever into position «OPEN».
Riding Style SAG [% of Travel]
SAG [mm] of Travel
100 mm 120 mm 130 mm 140 mm 150 mm
Cross Country / Race 15% 15 mm 18 mm 19.5 mm 21 mm 22.5 mm
Marathon / Tour 20% 20 mm 24 mm 26 mm 28 mm 30 mm
All Mountain / Enduro 25% 25 mm 30 mm 32.5 mm 35 mm 37.5 mm
2. Push the O-ring on the right stanchion to the
bottom, until it touches the wiper seal.
3. Sit on the bike with full equipment (backpack,
helmet, shoes...).
4. Sit on the bike as you would sit during the ride.

The fork goes down because of your own
weight.

Avoid impact loads.