DT SWISS O.D.L., Техническое руководство

Страница: 57 / 62

O.D.L - Technical Manual
56
Small Service
V2016.10
Mounting the Lower Unit
1. Clean the inside and the outside of the lower unit
(see section „Cleaning“, page 6 ).
2. Put two new, in DT Swiss Lube Fluid soaked foam
rings between the bushings and the wiper seals.

Ensure that the foam rings are not twisted.
3. Slide the SAG O-ring onto the upper unit
4. Slide the lower unit about 2 cm onto the upper
unit.
5. Fill 7 ml DT Swiss Fork Oil into the air side of the
lower unit.
Required oil, see table on page 46.
6. Fill 7 ml DT Swiss Fork Oil into the damping side of
the lower unit.
Required oil, see table on page 46.
7. Fix the fork between 40° and 70° for about
60 seconds to allow the bushings to be lubed.