manualshive.com logo in svg

DT SWISS O.D.L., Техническое руководство

Поделиться
Скачать
DT SWISS O.D.L. Скачать руководство пользователя страница 30

O.D.L - Technical Manual

29

APT (Adaptable Progression T

une)

V2016.10

5

APT (Adaptable Progression Tune)

The APT system allows the progression of the suspension curve to be adapted by easily adding or taking away 
one or more volume spacers in the fork's air chamber.

The fork is supplied with two volume spacers fitted. For personal adjustment, a further volume spacer is inclu-
ded in the supplied package.

The "-2 setting" offers a linear and comfortable suspension curve for lighter riders or riders who prefer more 
comfort.

The "-1 setting" offers a slightly less comfortable and less linear suspension curve, recommended for the ave-
rage rider who prefers more pleasant and soft riding behaviour.

The "stock setting" offers a more progressive suspension curve for sporty riders looking for direct riding beha-
viour.

The "+1 setting" offers a progressive suspension curve for aggressive riders looking for very direct riding beha-
viour.

stock setting
-2 setting

stock setting
-1 setting

stock setting

stock setting
+1 setting

-2 setting

-1 setting

+1 setting

stock setting

Содержание O.D.L.































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды