O.D.L - Technical Manual
45
Service and Care
V2016.10
7
Service and Care
7.1
Care
To ensure a long product life, follow the instructions below:
•
Clean the fork with a damp cloth. Remove dirt between stanchion/lower unit.
•
Never use aggressive cleaners that damage rubber materials (main seals)!
•
Never use high pressure cleaners. Water and dirt can get into the system and damage it!
•
Remove all visible, dried dirt from the area of the main seals. This will prevent dirt from getting into the
fork.
•
It is not necessary to grease the main seals. To get a good lubrication of the main seals, regularly turn your
bike or fork upside down.
•
After cleaning, lubricate the sliding surface of the remote lever on the handlebar.
7.2
Service Intervals
*If you use your bike in extreme conditions, you will have to service your components sooner.
If service intervals are not respected, any warranty claims can be denied.
Action
Interval
Big service by a DT Swiss service center
annually or after
200 operating hours*
Small service (see following)
50 operating hours*
Check the fork for damages and faultless function
before and after each ride
Check proper fixation
before and after each ride
Check the air pressure
before each ride
Check the remote lever on the handlebar
after each ride
Clean with a soft cloth and a suitable cleaner, especially in the area of the main
seals
Do not use high pressure cleaners and aggressive cleaners!
after each ride
Содержание O.D.L.
Страница 1: ...FORKS O D L Technical Manual V2016 10...
