O.D.L - Technical Manual
40
Converting from Manual to Remote Operation
V2016.10
4. Check if the spring is inserted correctly into the
cable guide.
The horizontally angled arm of the spring must
rest in the slot of the cable guide.
5. Push the cable guide with the spring onto the
damping unit.
If the cable guide cannot be pushed in fully,
possibly the O-ring is not positioned correctly
(see last step).
The cable guide must rest fully on the fork
crown.
The cable guide must face in drive direction to
the middle of the fork without touching the
fork crown.
6. Put the end of the spring facing upwards into the
bore of the remote wheel.
7. Put the remote wheel onto the lockout pin.
8. Put a 2 mm Allen key into the hex of the cable
fixing screw and turn the remote wheel approx.
180° until the remote wheel engages behind the
rise of the cable guide.
Push down the remote wheel while turning.
The rise of the cable guide prevents that the
remote wheel turns backwards.
9. Push the remote wheel down in the engaged
position and hold it in this position.
10. Remove the Allen key.
11. Screw the fixing nut onto the pin by hand.
Содержание O.D.L.
Страница 1: ...FORKS O D L Technical Manual V2016 10...
