XH6830 – DSE 802.11g ADSL Router
28
3. PPPoE:
Note that at the time of writing, PPPoE is not supported in New Zealand. If
you are connecting through PPPoE:
A. Enter the
PPPoE Account
provided by your ISP.
B. Enter the
PPPoE Password
provided by your ISP.
C. The
PPPoE Service Name
may kept blank.
D. Select
Dial on Demand
for simulating a dial-up connection.
E. Select
Auto-disconnect when Idle Time is over…
and
enter a period of
time after which you will be disconnected automatically if your Internet
connection is idle.
F.
Encapsulation:
Select the encapsulation type.
The
ISP will provide the
encapsulation type.
G.
VPI:
Enter in the VPI. The ISP defines this also. The default should be 0.
H.
VCI:
Enter in the VCI. The ISP defines this also. The default should be 100.
I.
Click Save & Restart to save the settings.
