PC1550 Version 4.0
[29]
Number of Rings Before Answering
Page 13
Default
1 2
Enter a number from 01 to 12 to set the number of rings before the panel will answer.
[30]
Reset To Factory Default
Page 13
[31]
4th System Option Code
Page 14
Default
Zone Light ON
Zone Light OFF
OFF
Zone Light 1
Enable download answer
Disable answer
OFF
Zone Light 2
Enable download callback
Disable callback
OFF
Zone Light 3
Answering machine over-ride
Disable over-ride
OFF
Zone Light 4
Show bypass status/armed
1
1
1
1
1
Show bypass status/disarmed
OFF
Zone Light 5
AC = 50 Hz
AC = 60 Hz
OFF
Zone Light 6
Restore on bell time out
Restore as follower
•
•
•
•
•If zone light 4 is ON, bypass status will always be shown. If zone light 4 is OFF, bypass status is shown only when the panel is disarmed.
[32]
5th System Option Code
Page 14
Default
Zone Light ON
Zone Light OFF
OFF
Zone Light 1
AC excluded from trouble
AC included
OFF
Zone Light 2
No bell during auto-arm
Bell during auto-arm
ON
Zone Light 3
Home/away with delay
Home/away as interior
OFF
Zone Light 4
Quick exit enabled
Quick exit disabled
OFF
Zone Light 5
Force arm on auxiliary delay
Auxiliary delay normal
ON
Zone Light 6
60 s bypass on power-up
Zones active on power up
[33]
Answering Machine Double Call Timer
Page 14
Default
0 6 0
Valid entries are “001” to “249”
[34]
6th System Option Code
Page 14
Default
Zone Light ON
Zone Light OFF
OFF
Zone Light 1
Audible Exit Delay with Urgency
Standard Exit Delay
OFF
Zone Light 2
Bell Squawk during Exit Delay
No Bell Squawk during Exit Delay
OFF
Zone Light 3
Audible Exit Fault enabled
Audible Exit Fault disabled
OFF
Zone Light 4
Urgency applied to Entry Delay
Standard Entry Delay
OFF
Zone Light 5
Bell Squawk during Entry Delay
No Bell Squawk during Entry Delay
OFF
Zone Light 6
[F] Key disabled
[F] Key enabled
[35]
LINKS1000 Test Reporting Code
Page 14
Default
F F
Program this section only if the LINKS1000 Cellular Alarm Transmitter is being used with the PC1550.
[36]
Keypad Lockout Control
Page 14
Default
Enter 2 2-digit numbers in the range of 00 to 99. Program the Number of Invalid Codes as “00” to disable the lockout feature.
0 0
Number of Invalid Codes before lockout
0 0
Lockout Duration (minutes)
[90]
Installer’s Lockout Enable
Page 14
[91]
Installer’s Lockout Disable
Page 14
WARNING!
Panels returned to DSC with the Installer’s Lockout enabled and no other apparent problems will be subject to an
additional service charge!
Содержание PC1550
Страница 23: ......