Dryer Master AM3, Руководство по эксплуатации продукта

Страница: 14 / 91

Dryer Master  A M 3 Product Manual
© Dryer Master Inc. Page: 12
Product Temperature: Actual temperature of product as detected by the Moisture sensor
temperature probe.
Moisture targets: Indicates, top to bottom “ High ” moisture trip point, “ Target ” moisture,
“ Low ” moisture trip point. This is an active touch area. Press to change values.
Product Name: This is the currently selected product. The text is replaced by an alarm
indicator in the event either the product temperature or product moisture is in alarm.
Product Moisture display: Actual moisture of the product as detected by the Dryer Master
Moisture sensor. Note this will indicate “ Empty ” when the sensor output is below critical trigger
threshold either by being empty, not connected or moisture so low that reading is not possible.
Rate: Discharge Rate Set point. This is the speed signal sent to the Dryers Discharge system.
This value is displayed when the dryer speed selection is switched to the AM 3 (Manual or
Automatic). This is an active touch area. Press to change values.
Rate Targets: Indicate s, top to bottom “ High ” rate value triggered by low moisture trip point,
“ normal ” Rate , “ Low ” rate value triggered by high moisture trip point. This is an active touch
area. Press to change values.
Auto Setup Touch key: Use to set operating limits and Auto modes.
Mode: Operating Mode, choices are “ Local ”, Speed set at the Dryers Speed potentiometer or
display, “ Manual ” Speed is set manually at the AM 3 , “ Automatic ” Speed set point is Automatic
via the programmed settings.
Menu: Product selection, Sensor calibrations, Alarms and others are available through the
Menu screens.
Trend: Switches to current operation trend graph .
1
2
3
4
5
6
8
9
10
7