Dryer Master AM3, Руководство по эксплуатации продукта

Страница: 30 / 91

Dryer Master  A M 3 Product Manual
© Dryer Master Inc. Page: 28
5.3 Calibrate Sensor
Two methods of adjusting the moisture sensors displayed moisture reading are provided. This is
referred to as sensor calibration. In actual fact the sensor rarely requires any form of calibration.
Calibration involves adjusting settings to permit the signal from the sensor to be scaled to display the
correct moisture. The default s
etup is the “Standard” method
5.3.1 Calibrate Sensor – Menu Selection
Press the “ Touch area ” <F2 Calibrate Sensor> or the < F2 > button
to enter the Sensor Calibration screen.
Figure 34. – Calibrate Sensor
5.3.2 Calibrate Sensor – Standard Method
If the Default “ Standard “method is configured this screen will
display.
The displayed moisture is the same “live” value displayed on the
main screen.
Press and hold the “ Touch area ” < +> or < -> to adjust the displayed
value to the correct moisture.
Press the “ Touch area ” <Exit> to return to the main screen
Press the “ Touch area ” <Back> to return to the previous screen
Figure 35. – Calibrate Sensor (Standard method)
SYSTEM
F1 F2 F3 F4
Exit Next
F2 Calibrate Sensor
SYSTEM
F1 F2 F3 F4
Exit
Sensor Calibration
14.8%
-
Back
+