Dryer Master AM3, Руководство по эксплуатации продукта

Страница: 37 / 91

Dryer Master  A M 3 Product Manual
© Dryer Master Inc. Page: 35
5.6.3 Alarm Delay – Value entry
Press the “ Touch area ” <keypad> to enter the value. Press the
“ Touch area ” <Enter> to accept the value and return to the
previous screen.
Or press the “ Touch area ” <Esc> to cancel and return to the
previous screen
Figure 47. – Alarm Delay – Value Entry
How the Alarm delay works:
The purpose of the alarm delay is to reduce repeated alarm activations as moisture or temperature
signals toggle around the alarm values set. The delay ensures that the signal is in alarm for the total
time period set as the delay value. It is possi
ble to set this value to “ 0 ” seconds which will allow
instantaneous activation of the alarm as it occurs.
1) Values form “ 0 ” to “ 999 ” seconds are settable. 999 seconds is 16 minutes and 39 seconds.
2) Do not set this value to “0” . In cases where repeated alarms can occur in less then a second.
The repeating alarm may trigger the Alarm Screen at a rate that prevents reaching this “Value
Entry” screen to reset the value.
3) In the event that the value has been set to “ 0 ” , and continuous alarms are occurring,
momentarily disconnect the Moisture sensor. With the sensor disconnected no more alarms
will occur. Once the Alarm Screen stops reappearing return to this screen and reset the time to
a few seconds.
5.7 Remote Alarm Delay
5.7.1 Remote Alarm Delay – Menu selection
A settable Remote alarm delay has also been incorporated into the system.
Press the “ Touch area ” <F2 Remote Alarm Delay > to display the
Remote Alarm Delay screen
Press the “ Touch area ” <Exit> to return to the main screen
Press the “ Touch area ” <Back> to return to the main screen
Press the “ Touch area ” <Next> to move to the next screen
Figure 48. – Remote Alarm Delay
010
_QZ
1
GHI
4
PRS
7
TUV
8
WXY
9
SYSTEM
F1 F2 F3 F4
0
ABC
2
DEF
3
JKL
5
MNO
6
Enter
Esc
SYSTEM
F1 F2 F3 F4
Exit Next
F2 Remote Alarm Delay
Back