Dryer Master AM3, Руководство по эксплуатации продукта

Страница: 20 / 91

Dryer Master  A M 3 Product Manual
© Dryer Master Inc. Page: 18
4 Operating the Dryer from the AM 3
This section will describe how to operate the dryer from the AM 3 . The modes of operation are
reviewed as well as an in-depth description of the 3 modes of Automatic. This section assumes the AM
3
has already been calibrated and set up to work with your dryer. Refer to the section “The Menu Tree”
to set up the various alarm settings and especially the rate output setup in the engineering section.
4.1 Operating the System
At start-up the system will boot to this current operation or main screen. While in manual mode the
rate set point will display whether the dryer is running or not.
4.1.1 Main Display – Local Mode
With the dryer running and discharging product you will see a moisture reading, the product
temperature, and the rate is displayed
if in “Manual” or Automatic” mode . There is no feed back so we
do not know what the rate is in “Local” mode.
Press the “ Touch area ” <Mode: > to display the Mode change screen.
Press the “ Touch area ” <Rate: > to display dryer discharge speed
“Rate” entry screen.
Press the “ Touch area ” <Auto Setup> to adjust or modify the
Automatic operation settings.
Figure 19. – Main Display
4.1.2 Operating Mode Select Screen
Press the “ Touch area ” Up or down arrow to toggle between
the modes “ Local ” , “ Manual ” , and “ Automatic ”
Press the “ Touch area ” < Enter> to select the item and return to the
main screen.
Press the “ Touch area ” <Esc > to return to the Main screen.
Figure 20. – Mode Select screen
Local
SYSTEM
F1 F2 F3 F4
Enter
Esc
Local
SYSTEM
F1 F2 F3 F4
CORN
15.0%
75 °F
Rate:
10.00
Trend Menu
Auto
Setup
See Dryer
Mode:
Local
16.0%
15.0%
14.0% 55.00
50.00
45.00