Dryer Master AM3, Руководство по эксплуатации продукта

Страница: 18 / 91

Dryer Master  A M 3 Product Manual
© Dryer Master Inc. Page: 16
3.4.4 Main Display – Automatic Mode
The system is in “ Automatic ” mode; dry er discharge rate is set here at the display. Depending on the
product moisture the system will switch between the 3 rates displayed. The rate values can be set by
pressing the Rate values touch area or
in the “ Auto setup ” section. The Main ra te will continue to need
periodic manual adjustment to maintain the operating window.
Press the “ Touch Area ” < Rate : > or the rate value < 50.00> to display
the rate entry screen.
Press the “ Touch Area ” < Rate Values > to display the rate entry
screen.
Press the “ Touch Area ” <Moisture targets> to display the moisture
target and moisture trigger point entry screen.
Figure 14. – Main Display – Automatic Mode
3.4.5 Alarm screen
The Alarm screen will display when the displayed moisture or
product temperature is in alarm. The active alarms will flash.
Press the “ Touch area ” <Exit> to return to the main screen
Press the “ Touch area ” <Alarm Log> to view the alarm history. See
section “ Alarm settings ” for additional information.
Figure 15. – Alarm screen
3.4.6 Main Display – Active Alarm
The Main Operations screen with active Alarm
The product label is replaced with an alarm event indicator. The
alarm Indicator will stay active until the condition clears
See section “ Alarm settings ” for information on setting the alarm
limits.
Figure 16. – Main Display – Active Alarm
SYSTEM
F1
Exit
Cr i t . Low Temp.
F2 F3 F4
Active Alarms
War n. Low Temp.
Cr i t . Low Moi st .
War n. Low Moi st .
Alarm
Log
SYSTEM
F1 F2 F3 F4
CORN
15.1%
Mode:
Automatic
75 °F
Rate:
50.00
Trend Menu
Auto
Setup
16.0%
15.0%
14.0% 55.00
50.00
45.00
SYSTEM
F1 F2 F3 F4
ALARM
5.1%
Mode:
Automatic
75 °F
Rate:
50.00
Trend Menu
Auto
Setup
16.0%
15.0%
14.0% 55.00
50.00
45.00