Dryer Master AM3, Руководство по эксплуатации продукта

Страница: 29 / 91

Dryer Master  A M 3 Product Manual
© Dryer Master Inc. Page: 27
5.1.4 Menu – Screen 4
Press the “ Touch area ” <F1 Information> or the < F1 > button to
obtain manufacturers information and system version.
Press the “ Touch area ” <F2 Removable Media> or the < F2 >
button to review the status of the data storage module
Press the “ Touch area ” <F3 Auto Setup > or the < F3 > button to
enter Automatic operation configuration. This function is also
accessible from the main screen.
Press the “ Touch area ” <Exit> to return to the main screen
Press the “ Touch area ” <Back> to return to the previous screen
Figure 31. – Menu Four (4)
5.2 Change Product
Four choices are available, Corn, Beans, Wheat, and Canola, each with their own unique moisture
setup. The product names cannot be changed. It is however possible to copy the calibration
parameters form any one product and enter those into any of the others. This is accomplished by
copying the slopes and offset from one product to the others while in the Engineering parameters.
Refer to the Engineering parameters section for more details.
5.2.1 Menu – Screen 1 – Change Product
Press the “ Touch area ” <F1 Change Product> or the < F1 > button
to enter the Product selection screen.
Figure 32. – Menu One (1) – Change Product
5.2.2 Change Product
Press the “ Touch area ” <Exit> to return to the main screen
Press the “ Touch area ” <Back> to return to the previous screen
Press the “ Touch area ” <Change > to toggle to the next product.
Four choices are available Corn, Beans, Wheat, and Canola, each
with their own unique moisture setup. The product names can
not be changed. It is however possible to copy the calibration
parameters form any one product and enter those into any of the
others.
Figure 33. – Change Product
SYSTEM
F1 F2 F3 F4
Exit
F1 Information
F2 Removable Media
F3 Auto Setup
Back
SYSTEM
F1 F2 F3 F4
Exit Next
F1 Change Product
SYSTEM
F1 F2 F3 F4
Exit Change
Select Product
Corn
Back