Setup/Operation (HR2250)
6-3
Gear Box
Gear Box Specification
•
HUB CITY – Poweratio 2000, Model HW2042ER
(Assy # 0251-00534)
•
Modified helical worm reducer
•
102:1 gear reduction
•
5/8” input shaft
•
1” output shaft
*CAUTION!
Do not operate the unit without ensuring it contains the
correct amount of oil. Do not overfill or underfill with oil.
Injury to personnel, unit or other equipment may result.*
*WARNING!
Oil housing and other components can reach high temperatures during operation and
can cause severe burns. Use extreme care when removing lubrication plugs and vents
while servicing the unit.*
See “Maintenance-Gear Box” section of the operator’s manual for Hub City Gear Box
oil filling procedures, service and maintenance.
Torque Limiter Clutch
•
The Torque limiter
protects the drive line
from damage due to
overload conditions. The
driven center member
slips on non-asbestos
friction disks during
overload situations in the
drive line.
•
Torque Ratings GLI
GLI Model 350w/two
springs
-minimum 60lb-ft
-maximum 190lb-ft
Please note that the torque ratings
are estimates. Actual torque
capacity may vary significantly depending on many factors. Field conditions such as oil,
humidity, water and temperature as well as the frequency and duration of slippage all affect
torque capacity.
Figure 44-Hub City Gear Box
Figure 45-Torque Limiter
Содержание 600 GTS Series
