Draytek Vigor2760, Руководство пользователя

Страница: 174 / 619

Vigor2760 Series User’s Guide 158
profile.

End - Type an address as the ending IP for such profile.
Src IP Subnet – Define a subnet containing IP address and
mask address.

Network – Type an IP address here.

Mask – Use the drop down list to choose a suitable
mask for the network.
Destination IP Any – Any IP can be treated as the destination IP.
Dest IP Range – Define a range of IP address as
destination IP addresses.

Start - Type an address as the starting IP for such
profile.

End - Type an address as the ending IP for such profile.
Dest IP Subnet – Define a subnet containing IP address
and mask address.

Network – Type an IP address here.

Mask – Use the drop down list to choose a suitable
mask for the network.
Destination Port Any – Any port number can be treated as the destination
port.
Dest Port Start - Type the destination port start for the
destination IP.
Dest Port End - Type the destination port end for the
destination IP. If this field is blank, it means that all the
destination ports will be passed through the WAN interface.
Send to if criteria
matched Interface – Use the drop down list to choose a WAN or
LAN interface or VPN profile. Packets match with the
above criteria will be transferred to the interface chosen
here.
Gateway IP – Specific gateway is used only when you
want to forward the packets to the desired gateway.
Usually, Default Gateway is selected in default.
Priority Packets will be transmitted based on all routes or Route
Policy. Vigor router will determine which rule will be
adopted for transmitting the packet according to the priority
of Static Route and Route Policy.
The greater the value is, the lower the priority is. Default
value for route policy is “200” which means it has higher
priority than the default route.
More options
Packet Forwarding to WAN via – When you choose
WAN (e.g., WAN1) as the Interface for packet
transmission, you have to specify the way the packet
forwarded to. Choose
Force NAT or Force Routing .
Failover to – Check this button to lead the data passing
through specific interface (WAN/LAN/VPN/Route Policy)
automatically when the selected interface (defined in
Send
via if criteria matched ) is down.

WAN/LAN – Use the drop down list to choose an