Dräger Savina, Инструкция по эксплуатации

Страница: 51 / 132

Configuration
51
Display in information bar:
Replace flow monitoring
or
Replace O
2
monitoring
or
Replace flow monitoring and O
2
monitoring
Flow monitoring is automatically activated each time Savina is
switched on.
When flow monitoring is deactivated, Savina does not
determine the following measured values:
— MV
— MVspont
Even when O
2
monitoring is deactivated, the devices requires
at least sensor 1 for accurate O
2
control. Otherwise it delivers
inaccurate O
2
/air mixes.
O
2
monitoring should only be deactivated when Savina is
supplied with air only.
O
2
monitoring remains deactivated even when the device
is switched on again.
Display in alarm line:
!! O
2
monitoring off
On acknowledging by pressing the »Alarm Reset« key,
display:
! O
2
monitoring off
●
Reactivate the monitor function after replacing the sensor.
Pmax ON/OFF
To use the pressure limit Pmax in the IPPV, IPPV
Assist
and
SIMV, SIMV/ASB ventilation modes.
The pressure limit value is set by means of the
»Pinsp« key.
Savina limits the airway pressure to that set value.
●
Press » Config.
∆∆
« key repeatedly until
»Configuration 2/4« appears.
● Select »Pmax« line = turn rotary knob,
to release for setting = press rotary knob.
● To set »ON« = turn rotary knob,
confirm = press rotary knob.
The pressure limit
»Pmax« is activated.
● To set »OFF« = turn rotary knob,
confirm = press rotary knob.
The pressure limit
»Pmax« is deactivated.
0
79 3
7
388