Dräger Polytron 7500 Скачать руководство пользователя страница 36 | Manualshive

Страница: 36 / 72

background image

The menu » Information «

Page 36 of 72 Pages

9023927 - 2nd edition - May 2007

Sub-menu » Instrument «

The sub-menu » Instrument Info « contains all functions for interrogating the unit sta-
tus.

Warnings

— This function displays any existing warnings in clear text with the warning number,

see page 29.
The icon »

« is displayed if any warnings are active.

●

Select the menu items » Information «, » Instrument « and » Warnings « in this
order, pressing the »

« key after each selection.

— Any existing warnings are displayed in clear text.

If more than one warning exists, the number of the currently displayed warning
and the total number of warnings are displayed in the top right corner
(example: 1/3 = screen 1 of 3).

Faults

— This function displays any existing faults in clear text with the error number, see

page 28.
If a fault exists, the icon »

« is displayed.

●

Select the menu items » Information «, » Instrument « and » Faults « in this order,
pressing the »

« key after each selection.

— Any existing faults are displayed in clear text.

If more than one fault exists, the number of the currently displayed fault and the
total number of faults are displayed in the top right corner (example: 1/2 = screen
1 of 2).

Fault codes

— This function displays any existing faults / warning codes in the form of a table.

If a fault exists, the icon »

« is displayed.

●

Select the menu items » Information «, » Instrument « and » Fault codes « in this or-
der, pressing the »

« key after each selection.

— Any existing faults are displayed in the form of numerical codes in a table. If all nu-

merical groups are displayed with the value » 00 «, no faults exist.

Modules

— All installed hardware modules are displayed.

●

Select the menu items » Information «, » Instrument « and » Modules « in this
order, pressing the »

« key after each selection.

— A list of all possible modules is displayed. The installed modules are indicated by

a »

«. Modules which are not installed are marked with a »

«.

●

Use the »

« and »

« keys to select individual modules and press the »

«

key to display more detailed information.

OK

OK

OK

OK

M

OK

«
...
34
35
36
37
38
...
»

Содержание Polytron 7500









































































Отзывы:

Нет отзывов

Похожие инструкции для Polytron 7500

EXTREME DUTY TPMS

Бренд: Valor Страницы: 2

Wind Monitor Series

Бренд: Campbell Страницы: 38

Бренд: Favero Electronics Страницы: 12

Бренд: Teledyne Hastings Instruments Страницы: 54

Бренд: LaserLiner Страницы: 52

Бренд: Veris Страницы: 8

Бренд: Olympus Страницы: 2

RP050B-S1/2 Series

Бренд: MST Страницы: 28

Бренд: Polimaster Страницы: 6

Бренд: STONEX Страницы: 99

Бренд: Kawai Страницы: 72

Бренд: R&S Страницы: 130

Бренд: MRC Страницы: 14

Бренд: Tonghui Страницы: 65

Бренд: Wacom Страницы: 23

Бренд: LaMotte Страницы: 2

Energy Tech 401

Бренд: CODEL Страницы: 131

Бренд: janitza Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды