Dräger Polytron 7500 Скачать руководство пользователя страница 31 | Manualshive

Страница: 31 / 72

background image

9023927 - 2nd edition - May 2007

Page 31 of 72 Pages

Menu functions

Menu functions

The menu can be operated as desired:
— from the keypad with an integrated display on the Polytron 7500,
— from a HART-compatible Hand Held Terminal (HHT),
— from a HART-compatible control unit or
— a Polytron 7500 Palm Pilot 515 (non-Ex version) or Palm Pilot 515x ex-version.

The menus are operated with the three keys – »

«, »

« and »

«. The menus

appear on the display.

Key »

«

— Use this key to move upwards through the menus.

Key »

«

— Use this key to move downwards through the menus.
— If the key is held down for more than 3 seconds, the main menu is opened.
— If the key is held down for longer than 1 second and less then 3 seconds, the

quick menu is opened (the Info menu is displayed without prompting for a pass-
word).

Key »

«

— This key is used to confirm inputs and selected menus and functions

Menu structure

Overview: page 32.

The unit has two operating modes: measuring mode and menu mode.
Menu mode contains the menus » Information «, » Calibration « and » Settings «.

Menu » Information «

The menu » Information « can be opened by any user, but the user is unable to make
any changes with this menu option.

Menu » Calibration «

This menu permits routine operations needed for the regular maintenance of the Pol-
ytron 7500.
It should be accessible to persons who are responsible for such maintenance. If the
maintenance password is entered, only this menu is accessible.

Menu » Settings «

This menu permits the setting of individual unit and sensor parameters. It should be
accessible to authorised persons from the measuring and regulation department or
the work safety department. If the password for this menu is entered, the menu
» Calibration « is also accessible.

The passwords for the menus » Calibration « and » Settings « can be changed at
any time, page 47.

M

OK

M

OK

«
...
29
30
31
32
33
...
»

Содержание Polytron 7500









































































Отзывы:

Нет отзывов

Похожие инструкции для Polytron 7500

Бренд: Yamaha Страницы: 3

SXNP10 - DIGITAL PIANO

Бренд: Panasonic Страницы: 63

Бренд: A&D Страницы: 74

Бренд: M3S Страницы: 40

Бренд: IET Labs Страницы: 114

Бренд: WalkLAB Страницы: 16

Бренд: E-Mon Страницы: 72

Бренд: THORLABS Страницы: 21

Бренд: Aktobis Страницы: 7

IMI SENSORS 604B11

Бренд: PCB Piezotronics Страницы: 19

Бренд: GREISINGER Страницы: 20

Бренд: Sonel Страницы: 26

Бренд: THORLABS Страницы: 20

Бренд: DynAmp Страницы: 43

Бренд: Ditel Страницы: 2

Бренд: Campbell Страницы: 20

Бренд: Doepke Страницы: 2

SI Analytics Lab 855

Бренд: Xylem Страницы: 60

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды