Dräger 9054673 Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 48

Dräger 9054673 Скачать руководство пользователя страница 24

Operation

24

Supplement

Fabius plus SW 3.n

Preparing for storage or transport

The following safety information has changed:

WARNING

Risk of tipping over during transport

The medical device may tip over if handled

incorrectly. Observe the following when

transporting the medical device:

– The medical device may only be moved by

people who have the physical ability to do

so.

– To improve the maneuverability, transport

the device with 2 persons.

– When transporting over inclines, around

corners, or over thresholds (e.g., through

doors or in elevators), make sure that the

medical device does not bump against

anything.

– Remove any devices mounted to the

holding arms or the top of the device.

– Clear the writing tray and slide it

completely into the device.

– Do not pull the medical device over hoses,

cables, or other obstacles lying on the

floor.

– Do not activate the brake while the

medical device is being moved.

– Use only the handles provided to push or

pull the device.

«
...
22
23
24
25
26
...
»

Содержание 9054673

















































Отзывы:

Нет отзывов