Dräger Medical Zeus Скачать руководство пользователя страница 89

Страница: 89 / 179

5133.001

All rig

s reserved.

rved.

.0_

_Pr

ted

_03

.05

6_W

1_S

Zeus

Maintenance procedures

Blower spindle

2.1

Replacement inter-
val

For replacement intervals of the blower spindle, refer to the Instructions for
Use manual.

2.2

Replacing the
blower spindle

1. Remove the breathing system.

2. Loosen the two quick-locking screws on the blower, and remove the

blower from the breathing system.

3. Unscrew the 3 socket-head cap screws on the upper part of the blower

from below.

4. Remove the plate with the locking pins.

5. Unscrew the 3 socket-head cap screws on the blower cover and remove

the blower cover complete with the casing top section, the sleeves and
the bellows.

6. If necessary, replace the blower cover, the bushes or the bellows.

7. Lift out the blower spindles.

Figure 3

Blower spindle

8. Refit the blower spindles in the reverse order of their removal.

9. Attach the label (month and year of the blower replacement) to the hous-

ing of the blower drive.

10. Perform the ventilation modes function tests as per Zeus test document.

CAUTION

Risk of damage due to sparking!
To avoid sparking, the blower may only be removed in “Standby” or with
the Zeus switched off.

CAUTION

Risk of damage to the blower spindle.
In order to avoid damage to the blower spindle, handle it only by its metal
housing. No foreign bodies must be allowed to enter the blower when refit-
ting.

Содержание Zeus



























































































































































Результаты поиска

Содержание Zeus

Отзывы:

Бренды по названию

Популярные бренды

Dräger Medical Zeus, Техническая документация инструкция

Результаты поиска

Содержание Zeus

Отзывы:

Бренды по названию

Популярные бренды