Dräger Medical Narkomed GS, Инструкция оператора

Страница: 149 / 204

Draeger Medical, Inc.
Narkomed GS Operator’s Instruction Manual 14-9
Breathing Pressure Monitoring 14
• The horizontal dotted line on the waveform and the adjacent marker
on the Y-axis both represent the threshold pressure (apnea) alarm
limit. The horizontal dotted line is always displayed, but the marker on
the Y-axis appears only when the threshold pressure alarm limit is less
than or equal to the top of the scale set by the system. There is a
marker in the illustration above, because the threshold pressure alarm
limit (12 cm H
2
O) is less than the top of the scale (20 cm H
2
O).
• The pressure high alarm limit is denoted by a marker on the Y-axis
only when it is less than or equal to the top of the scale set by the
system. In Figure 14-5, the pressure high alarm limit (35 cm H
2
O) is
greater than the top of the scale (20 cm H
2
O).
When a high alarm limit marker is displayed, its appearance depends on
whether the pressure high alarm limit is less than or equal to the top of
the scale. Figure 14-6 illustrates the difference in appearance. (Note that a
threshold pressure alarm limit marker is also displayed in these
examples.)
Figure 14-6. Breathing Pressure Trace Window with Examples of High Alarm Limit Markers
OP87020
45
23
PRESSURE HIGH ALARM
LIMIT < TOP OF SCALE
50
PRESSURE HIGH ALARM
LIMIT = TOP OF SCALE
SCALE = 0-50 cm H
2
O
STEP-LIKE MARKER HORIZONTAL MARKER
23
RETURN TO THIS MANUAL'S TABLE OF CONTENTS
RETURN TO CD-ROM TABLE OF CONTENTS