18. Add-on volume based dosing
96
Dr. A. Kuntze
I
Gutes Wasser mit System
Robert-Bosch-Str. 7a
40668 Meerbusch
+49 (0) 2150-7066-0 / Fax -60
www.kuntze.com
18.4. Activating and deactivating the controller
To activate or deactivate the controller you have to change the operation mode. You can change the
mode in the main menu by selecting the symbol MODE. The symbol changes its design according to
the selected mode.
In the AUTO mode the controller is active and operates the relays and/or current outputs and ultimately
the connected actuators. Manual operation of the relays and current outputs via the test function is not
possible.
In the manual mode the controller is deactivated and you can operate the relays and current outputs
manually via the test function.
In the maintenance mode – HOLD - the controller is deactivated.
NOTE
More information on the operation modes can be found in chapter 5 – Mode.
Durchflussanzeige
18.5. Flow display
For applications with volume based dosing, we advise to use the desktop design “Flow” in the menu
SYSTEM.
Below the measured values the flow rate, the controller output in % and the status of relay 2 are
displayed.
Note
More information on the various display designs can
be found in chapter 12 – system functions.