20. Trouble-Shooting
110
Dr. A. Kuntze
I
Gutes Wasser mit System
Robert-Bosch-Str. 7a
40668 Meerbusch
+49 (0) 2150-7066-0 / Fax -60
www.kuntze.com
Popup message
Cause
Suggested remedies
Memory stop data
logging
The SD card is fulll.
SD card full, data logging stopped.
If you have set the logger to STOP mode, then the instrument stops the logging when the SD card is full.
Change the SD card, or remove some of its contents, or select the mode RING to overwrite older data.
20.9. Reset
As a last resort it is sometimes necessary to restore factory settings. With the RESET function you
erase all settings by operators. Activated add-ons will of course remain activated.
With the Reset function, the system is set to a defined condition. User settings that might severely
impede an evaluation of the measured values, such as a calibration gone wrong, are erased.