Dr. A. Kuntze Neon Des Скачать руководство пользователя

Страница: 8 / 116

1. Your Neon

Dr. A. Kuntze

Gutes Wasser mit System

Robert-Bosch-Str. 7a

40668 Meerbusch

+49 (0) 2150-7066-0 / Fax -60

www.kuntze.com

1.1.

General and safety instructions

This operation manual applies to the following instruments

Instrument type

Neon

CM oder Neon

SW version

v. 3.12

The manual contains technical information on installation, operation, and maintenance.

Keep this manual in a place where you can always look up the safety instructions and the information

on handling and usage. According to DIN 61010 the manual is part of the product and has to be

preserved as long as the instrument is used, and given to the new owner if the instrument is sold.

The instrument was designed, built, and tested according to the directives for electronic devices and

has left our company in perfect working condition. To preserve this condition and to ensure safe opera-

tion, follow all instructions carefully and pay special attention to all warnings issued in this manual. If

the instrument is visibly damaged or has been stored inappropriately or if there are any doubts

concerning safe operation, shut it down and make sure it cannot be restarted.

You will notice that certain safety instructions are highlighted:

Warning

highlights instructions for the protection of people. Disregarding warnings

may cause accidents and injuries!

Attention

highlights instructions for the protection of the instrument and equipment.

Disregarding these instructions may lead to damage or destruction of the

instrument or equipment!

Note

is used to highlight interesting details.

1.2.

Warranty conditions

We have to point out that the warranties specified in our trading conditions are valid only if the following

conditions are met:

Installation and start-up by Dr. A. Kuntze personnel or trained and authorized technicians

Maintenance of instrument and peripherical equipment according to the instructions of this manual

Use according to the designation specified on the following pages

Use of original accessories and spare parts only

Observance of operation conditions and settings according to this manual

Warranty is void if any one of the conditions listed above is disregarded.

1.2.1.

Transport damages

Please check for damages immediately after delivery and report any damages within 24h to the

delivering company. Never work with a damaged instrument!

Содержание Neon Des





















































































































Результаты поиска

Содержание Neon Des

Отзывы:

Похожие инструкции для Neon Des

Бренды по названию

Популярные бренды

Dr. A. Kuntze Neon Des, Руководство пользователя

Результаты поиска

Содержание Neon Des

Отзывы:

Похожие инструкции для Neon Des

Бренды по названию

Популярные бренды