Installation Instructions for Wi-Q™ Technology 9KQ Cylindrical Locks
10
Installing the lock
BEST
a Product Group of dormakaba USA Inc.
13
Route wire harness and position
outside escutcheon
1 From the outside of the door, feed the motor
connector, battery connector, door status switch, and
antenna wire, through the harness hole.
Caution:
When routing the connectors, make sure
the wire harness is not routed across any sharp
edges or over any surface that could damage its
sleeving or wire insulation.
2 On the inside of the door, insert the two countersunk
mounting screws into the holes at the top and bottom
of the fire plate.
3 Tighten the mounting screws until the fire plate is
securely mounted to the door.
14
Route wires on fire plate
1 Route the motor connector wire, RQE connector, and
door status connector underneath the side tabs as
shown in Figure 14.
2 Route the battery connector and antenna wire above
the side tabs. See Figure 15 for additional detail.
Figure 13 Feeding the wire harness connectors through
the harness hole
Motor connector
Outside escutcheon
Outside of door
Battery connector
Door status
connector
Antenna wire
RQE connector
Harness hole
RQE connector
Figure 14 Routing the wires on the fire plate
Inside of door
Motor connector
Battery connector
Side tabs
Door
status
connector
Antenna wire
RQE connector
Door status
connector
Installation Instructions for Wi-Q™ Technology 9KQ Cylindrical Locks
9
Installation Instructions for Wi-Q™ Technology 9KQ Cylindrical Locks
Installing the lock
BEST
a Product Group of dormakaba USA Inc.
11
Install fire plate
Position the fire plate on the inside of the door so that the
chassis fits through the square opening in the fire plate, as
shown in Figure 11.
12
Install through-bolts and
inside rose liner
1 Place the inside rose liner on the chassis, aligning the
holes in the rose liner with the holes prepared in the
door, as shown in Figure 12.
Caution:
Make sure that the motor wire is pulled
toward the top of the fire plate and avoid routing
it over any surface that could damage the
sleeving or wire insulation.
2 Install the through-bolts through the rose liner and
door in the top and bottom holes.
Caution:
Make sure that there is clearance for the
motor wire between the rose liner and the door.
3 Tighten the rose liner to the door and fire plate with
the through-bolts.
4 Install the hub washer over the rose liner.
Figure 11 Installing the fire plate
Inside of door
Fire plate
Figure 12 Installing the through-bolts and rose liner
(9K shown)
Inside of door
Motor wire
Rose liner
with RQE
Hub
washer
Through-bolt
RQE
connector
Содержание BEST Wi-Q ONGUARD
