Dome CXtra, Руководство пользователя

Страница: 138 / 168

134 | Dome CXtra
3 Select the type of reminder message you want to receive —
Informational or Warning.
Selecting the Informational reminder adds a reminder event to the
History log for each display at the intervals specified. Selecting the
Warning reminder causes a message box to appear on your screen.
In addition, the reminder event changes the Dome CXtra icon in the
system tray and adds an entry into the History log for each display.
If the reminder is issued as a warning, a status change trap is sent to
the SNMP console. See “SNMP Management Console” on page 147
for more information.
4 Click Apply or OK.
Completing AAPM TG18 Tests
You can complete the following tests for each display:
• Acceptance Test – A non-scheduled set of evaluations used to
determine if the performance of a new display panel is satisfactory.
• Monthly/Quarterly Test – A set of evaluations that you can choose
to complete at 30- or 90-day intervals.
• Daily Test – Evaluations you want to complete every day.
• Annual Test – Evaluations completed only once a year.
The routine tests (daily, monthly, annual) are not enabled until the
acceptance test has been completed and the report has been saved
for a given display.
By default, the system assigns evaluations to each test based on the
TG18 recommendations. You can use the Configuration tab to
change the evaluations assigned to any test suites. See “To set up
entries on the Configuration tab” on page 130 for more information
on viewing and changing assigned evaluations.