AAPM TG18 Test Service | 129
2 Click Setup. The Photometers tab of the TG18 Test Setup
Information dialog appears.
To set up entries on the Photometers tab
1 If you have a supported photometer installed, select the model
name on the Photometer pull-down list. Otherwise, select Other.
If you select a supported photometer, the system automatically lists
the manufacturer’s name in the field provided.
2 If you selected Other, type the manufacturer’s name.
3 Enter the photometer serial number.
4 Select the COM port used to connect the photometer to
the computer on the COM Port pull-down list.
5 Click Apply. If you are not using a supported photometer,
a system warning message explains that you must manually
enter measurement values while completing tests. Click OK.
Содержание CXtra
Страница 1: ...Dome CXtra User s Guide ...
Страница 45: ...RightLight Service 41 Color table Lists the following data values by Kelvin scale or CIE xy coordinates ...
Страница 118: ...114 Dome CXtra To set up entries on the Location tab Enter descriptive text and click Apply ...
Страница 168: ...NDS Surgical Imaging LLC 5750 Hellyer Avenue San Jose CA 95138 1000 USA www ndssi com ...
