DIN Test Service | 123
Running a DIN Constancy Test
You must successfully run a DIN acceptance test (described in the
previous section) on the device being tested before you can run the
constancy test described below. If the Privilege service is installed,
you must log on as a privileged user before you run a DIN constancy
test. (See page 138.)
To run a DIN constancy test
1 Open the CXtra Services menu and select DIN Test.
2 Click Run Constancy Test to open the test selection dialog.
3 Select the constancy tests you want to run, and then click OK.
4 Using the photometer identified in the setup procedure, follow
the instructions provided by the test wizard.
NOTE: For photometers not identified by name on the setup pull-
down list, type the photometer reading into the fields provided in
the test wizard dialogs.
Содержание CXtra
Страница 1: ...Dome CXtra User s Guide ...
Страница 45: ...RightLight Service 41 Color table Lists the following data values by Kelvin scale or CIE xy coordinates ...
Страница 118: ...114 Dome CXtra To set up entries on the Location tab Enter descriptive text and click Apply ...
Страница 168: ...NDS Surgical Imaging LLC 5750 Hellyer Avenue San Jose CA 95138 1000 USA www ndssi com ...
