3. Initial Setting Operation before use
3 - 1
. Function Confirmation
Perform the following simple steps to verify that the oscilloscope is operating
properly
Connect the unit power adapter.
Press button longer
- Press key
- Press to enter “UTILITY”
- Select 3/4 menu page
- Press “Self Cal”
- Select “OK?”
Self-Cal needs approx 4minutes. Verify whether the tests are OK. To proceed
the test, disconnect any Connections on Input terminals (Oscilloscope probe.
Test Lead, USB Connector etc). Self-Cal performs with is the allowable
Conditions and circumstances.
3. Initial Setting Operation before use
3.
Initial Setting Operation before use
For more effective operation, the instrument performs quick confirming of
functions and provides passive probe installation and adjustment, and setting of
time and date. This section explains the methods for quick confirmation on if the
instrument is powered on, if it is operating properly, adjusting the probe using
the internal adjusting signal, and setting the time and date
- All initialization/configuration steps must be performed when first using the
instrument.
- Basic Self Tests shall execute upon power on. Be sure not to connected with
any signal to the instrument during testing. The purpose of this test is to flag a
major system problem.
- Whenever attaching the passive probe(initially, for the first time) to the input
channel, the probe adjustment steps must be performed.
Self Calibration
10
Hand-held Digital Oscilloscope Meter
11
