8. ZOOM/SAVE
8. ZOOM/SAVE
UPDATE
Erase saved data and changed to present setting:
move to
√
mark area where to update by Encoder switch.
Press key, Pop Up window shows “Which function select ?” “Update
Recall”
Select the menu by Encoder switch and push down. Another Pop Up window
“The existed set up data will be erased. Okay ? Not OK ?” shows
select “OK” by Encoder switch and push down the Encoder switch now
update is finished with present setting.
ERASE
Move to
√
mark area where to erase by Encoder switch.
Press key, Pop up window shows “which function select ?” “Update
Recall erase”
Select menu by Encoder switch and push down. The Setting is eased.
When select Waveform SAVE/Recall
SAVE
If press Save/Recall Waveform , Save/Recall pop up window shows.
Select Wave 1 through Wave 10 by Encoder switch.
When
√
mark shows next to Wave Save, this means the Wave number
already saved. Find the Wave number where
√
mark does not show. Press
down the Encoder switch. Then
√
mark should show to confirm the saving.
58
Hand-held Digital Oscilloscope Meter
59
