8. ZOOM/SAVE
8. ZOOM/SAVE
RECALL
Select the SAVED data with mark by Encoder switch Press F1 key. Pop Up
window shows “Which function select ? Update Erase” then select the
Desired menu by Encoder switch and press the Switch. If press F3
Reference On/Off key, saved waveform data will be erased. If press F3 key
again, return back to the last setting. Can not recall if the setting is erased
from memory while recall.
UPDATE
Erase saved data and changed to present setting
move to
√
mark area where to update by Encoder switch.
Press key, Pop Up window shows “Which function select ?” “Update
Recall ”
Select the menu by Encoder switch and push down. Another Pop Up window
“The existed Wave data will be erased. Okay ? Not OK ” shows
select “OK” by Encoder switch and push down the Encoder switch now
update is finished with present setting.
ERASE
Move to
√
mark area where to erase by Encoder switch.
Press key, Pop up window shows “which function select ?” “Update
Recall erase”
Select menu by Encoder switch and push down. The Waveform is erased.The
Waveform is erased.
60
Hand-held Digital Oscilloscope Meter
61
