DOM WENS 800 Series Скачать руководство пользователя

Страница: 27 / 43

7 - 5.

CAPACITANCE measurements

①

Insert the black test lead into the negative jack(COM) and the red test lead
into the positive CAP jack.

②

Press key to enter capacitance.

③

The meter will turn on in the capacitance autoranging mode.

④

Touch the test lead to the capacitor to be tested. The display will indicate
proper decimal point, value and symbol.

WARNING.

To avoid electric shock, disconnect power to the unit under test and
discharge all capacitors before taking any capacitance measurements.
Remove the batteries and unplug the line cords.

7 - 6.

CURRENT, TEMPERATURE, Relative Humidity, Pressure with
exterior adapter

①

Insert the(

─

) adapter into the negative(COM) jack and the red test lead into

the AUX input jack on the instrument.

②

Press

key or

key to enter currents or temperature respectively.

③

Select menu by using keys.

7. Multimeter

7 - 4.

CONTINUITY check

①

Insert the black test lead banana plug into the negative jack and the red test
lead banana plug into the positive jack.

②

Press OHMMETER key. Select “CONTINUITY” by key.

③

Touch the test probe tips to the circuit or wire you wish to check.

If the resistance is less than 30

Ω

, the audible signal will sound.

WARNING.

To avoid electric shock, never measure continuity on circuits or wires that
have voltage on them

CAUTION Exterior Adapter should be recogrized with international safety
stardards. internal circuit of adater is to be with mv circuit.

Hand-held Digital Oscilloscope Meter

Содержание WENS 800 Series












































Результаты поиска

Содержание WENS 800 Series

Отзывы:

Похожие инструкции для WENS 800 Series

Бренды по названию

Популярные бренды

DOM WENS 800 Series, Руководство оператора

Результаты поиска

Содержание WENS 800 Series

Отзывы:

Похожие инструкции для WENS 800 Series

Бренды по названию

Популярные бренды