Docomo FOMA P706ie, Инструкция по эксплуатации, Страница: 95 / 577

93
S
o
un
d/
Sc
re
en
/L
ig
ht
Se
tt
in
gs
Information
≥
You can set the Call Receiving display by selecting “Phone” or “Videophone”, and
then by selecting “Select calling disp.”. Go to step 2 on page 100.
≥
You can set the Mail Receiving display by selecting “Mail”, “Chat mail”, “MessageR” or
“MessageF”, and then by selecting “Select receiving disp.”. Go to step 2 of “Set
Stand-by Display” on page 98.
≥
The priority order of ring tones is as follows: “Read aloud settings”
→
“Setting for
Phonebook entry” → “Group setting” → “Select ring tone”.
If a call comes into Number B while using 2in1, the priority order of the ring tones is as
follows: “Read aloud settings”
→
“Setting for Phonebook entry”
→
“Group setting”
→
“Ringtone set. for No. B” (see page 401).
≥
The ring tone or images set at purchase might be played back or displayed for
incoming calls or messages, depending on the combination of this function and
“Display setting”.
≥
See “
i
motion info” to check whether the i-motion movie can be set for a ring tone.
≥
When you set an i-motion movie containing video and sound for a mail ring tone, you
can press
- r
or others to stop the ring tone.
≥
When you set an i-motion movie containing video and sound for a ring tone
(Chaku-motion), it is played back taking priority over “Display setting”. However, if you
set a voice-only i-motion movie for the ring tone, the image set by “Display setting” is
displayed.
≥
When you set an i-motion movie containing video and sound for “Select calling disp.”,
the i-motion movie is played back taking priority over this function for incoming calls.
However, if you set an i-motion movie containing only video for “Select calling disp.”,
the ring tone selected for this function is played back for incoming calls.
≥
When different types of mail — i-mode mail, SMS messages, chat mail, or Messages
R/F — are received at the same time, the priority order of ring tone as follows: “Chat
mail”
→
“i-mode mail/SMS”
→
“MessageR”
→
“MessageF”. If you receive the same
type of mail simultaneously, the ring tone corresponding to the mail you have received
last works.
≥
For the melody downloaded from a site or attached to mail, or the melody prohibited
to attach to mail or output from the FOMA phone, a playing part may be specified in
advance. When the play-part-specified melody is set for the ring tone, only the
specified part is played back.
1
m 1
Settings
1
Sound
1
Position to play
1
Select a play start position.
Play all . . . . . . . . Plays back from the beginning of the melody.
Play portion . . . Plays back from the start position set for the melody.
You can set the vibrator to notify you of incoming calls and mail.
1 m 1
Settings
1
Incoming call
1
Vibrator
1
Select an incoming type
1
Select a vibration pattern.
Pattern 1 . . . . . . . . Alternates between vibration on (about 0.5 second) and off
(about 0.5 second).
Pattern 2 . . . . . . . . Alternates between vibration on (about 1 second) and off
(about 1 second).
Pattern 3 . . . . . . . . Alternates between vibration on (about 3 seconds) and off
(about 1 second).
Melody linkage . . . Vibrates in time with the vibration pattern stored in the melody.
OFF . . . . . . . . . . . . Does not vibrate.
≥
While you are selecting a pattern, the FOMA phone vibrates by the selected
pattern for confirmation. However, it does not vibrate if you select “Melody
linkage”.
≥
The following icons are displayed on the Stand-by display while the vibrator is set:
: Vibrates for incoming voice calls or videophone calls.
: Vibrates for incoming mail, chat mail or Messages R/F.
: Vibrates for incoming voice calls or videophone calls, and vibrates for
incoming mail, chat mail or Messages R/F.
+ m - 6 - 4
<Position to Play>
Setting Play Start Position of Melody Set
for Ring Tone or Alarm Tone
+ m - 5 - 4
<Vibrator>
Informing You of an Incoming Call by
Vibration